Causes and solutions of unsmooth and uneven ink output of uv flat panel printer.
author: Uvink
2022-12-19
Causes and solutions of unsmooth and uneven ink output of uv flat panel printer.
For climate reasons, when the outside temperature is too low or too high, the uv ink
itself will be coagulated, the smoothness will be damaged, and the volatilization will
be abnormal. The external performance is that the ink from the nozzle is uneven.
Solution: When the weather is hot in summer, add an air conditioner in the workshop to
keep ventilation, and do not place the uv flat-panel printer in the direct sunlight.
When the temperature is cold in winter, turn on the heating, use the small sun to heat
the car or install a heater at the ink outlet of the nozzle. Keep the temperature of
the uv flat-panel printer between 15 ° - 40 ° and the humidity between 30% - 70%.
Causes and solutions of unsmooth and uneven ink output of uv flat panel printer.
The reason for the printing head is that the printing hole of the printing head is blocked,
resulting in abnormal ink discharge, broken needle, missing thread, etc. The nozzle needs
to be cleaned by pressing ink, and observe whether the ink jet state has waterfall like
flowing lines. If it is not possible, the nozzle needs to be cleaned with cleaning solution.
If it is serious, the nozzle needs to be disassembled and ultrasonic cleaned after immersion.
If it is not feasible, the nozzle needs to be replaced. In the daily maintenance process,
the status chart of the nozzle needs to be printed out every day for observation.
Causes and solutions of unsmooth and uneven ink output of uv flat panel printer.
The ink supply system fails. On many manually adjusted uv flat panel printers, the negative
pressure value is extremely low and high, which affects the normal flow of uv ink. When
this happens, it is necessary to adjust the negative pressure. If possible, the negative
pressure system can be directly upgraded to avoid this situation.
For climate reasons, when the outside temperature is too low or too high, the uv ink
itself will be coagulated, the smoothness will be damaged, and the volatilization will
be abnormal. The external performance is that the ink from the nozzle is uneven.
Solution: When the weather is hot in summer, add an air conditioner in the workshop to
keep ventilation, and do not place the uv flat-panel printer in the direct sunlight.
When the temperature is cold in winter, turn on the heating, use the small sun to heat
the car or install a heater at the ink outlet of the nozzle. Keep the temperature of
the uv flat-panel printer between 15 ° - 40 ° and the humidity between 30% - 70%.
Causes and solutions of unsmooth and uneven ink output of uv flat panel printer.
The reason for the printing head is that the printing hole of the printing head is blocked,
resulting in abnormal ink discharge, broken needle, missing thread, etc. The nozzle needs
to be cleaned by pressing ink, and observe whether the ink jet state has waterfall like
flowing lines. If it is not possible, the nozzle needs to be cleaned with cleaning solution.
If it is serious, the nozzle needs to be disassembled and ultrasonic cleaned after immersion.
If it is not feasible, the nozzle needs to be replaced. In the daily maintenance process,
the status chart of the nozzle needs to be printed out every day for observation.
Causes and solutions of unsmooth and uneven ink output of uv flat panel printer.
The ink supply system fails. On many manually adjusted uv flat panel printers, the negative
pressure value is extremely low and high, which affects the normal flow of uv ink. When
this happens, it is necessary to adjust the negative pressure. If possible, the negative
pressure system can be directly upgraded to avoid this situation.
What are the requirements for colorants in inks? 
What are the factors affecting ink oxidative conjunctival drying? 
What factors affect the low adhesion fastness of plastic gravure printing ink? 
What are the advantages of printing glass with a uv flatbed printer? 
How to control the viscosity of water-based ink? 
What are the competitive advantages of uv inks? 
Is the viscosity of water-based ink important? 
What factors determine the shelf life of uv inks?
