What are the advantages of direct to film ink hot stamping film？
author: Uvink
2022-12-28
What are the advantages of direct to film ink hot stamping film？The scalded
pattern looks like PU glue, with strong stretch resilience and no deformation,
and is softer than the glue (30-50% softer than the pattern printed on the oily
coating film). It is suitable for direct to film ink. 100% ink can be printed freely without
gathering ink or flowing ink. The surface of the film is dry and can be sprayed
with 200 mesh superfine powder without sticking powder. It can be easily torn hot,
warm and cold. It has exclusive core key technologies at the forefront of the industry,
has more advantages in controlling quality stability, and leads the industry to a
new direction with the power of scientific and technological innovation.
Usage: The ink absorbing coating layer is the printing surface; Handle with care,
pay attention to the scratch resistant ink absorption coating; After printing, bake for
40~90 seconds, and adjust the appropriate temperature according to the performance
of the hot melt powder; 60~80 mesh hot melt powder can be used to realize second
tear, 100~150 mesh hot melt powder is recommended to be torn warm or cold, and
150 mesh hot melt powder is recommended to be torn cold; Store in a dry place
and pay attention to moisture.
Note: If the baking temperature is too high or the baking time is too long after the
hot melt powder is sprayed after printing, the pattern surface may have anti white spots.
This is because the slow drying agent in the ink cannot be volatilized after the hot melt
powder is formed into a film. After the gas is cooled, it forms a mist crystal on the
pattern surface. This anti white phenomenon will slowly disappear after several days of
storage in contact with the air, which will not affect the beauty of the pattern later.
The transfer press temperature is 140-160 degrees, 6-10 seconds, according to
the different mesh number of hot melt powder, and the fabric temperature zone,
the most appropriate temperature zone can be adjusted to easily achieve hot tearing.
pattern looks like PU glue, with strong stretch resilience and no deformation,
and is softer than the glue (30-50% softer than the pattern printed on the oily
coating film). It is suitable for direct to film ink. 100% ink can be printed freely without
gathering ink or flowing ink. The surface of the film is dry and can be sprayed
with 200 mesh superfine powder without sticking powder. It can be easily torn hot,
warm and cold. It has exclusive core key technologies at the forefront of the industry,
has more advantages in controlling quality stability, and leads the industry to a
new direction with the power of scientific and technological innovation.
Usage: The ink absorbing coating layer is the printing surface; Handle with care,
pay attention to the scratch resistant ink absorption coating; After printing, bake for
40~90 seconds, and adjust the appropriate temperature according to the performance
of the hot melt powder; 60~80 mesh hot melt powder can be used to realize second
tear, 100~150 mesh hot melt powder is recommended to be torn warm or cold, and
150 mesh hot melt powder is recommended to be torn cold; Store in a dry place
and pay attention to moisture.
hot melt powder is sprayed after printing, the pattern surface may have anti white spots.
This is because the slow drying agent in the ink cannot be volatilized after the hot melt
powder is formed into a film. After the gas is cooled, it forms a mist crystal on the
pattern surface. This anti white phenomenon will slowly disappear after several days of
storage in contact with the air, which will not affect the beauty of the pattern later.
The transfer press temperature is 140-160 degrees, 6-10 seconds, according to
the different mesh number of hot melt powder, and the fabric temperature zone,
the most appropriate temperature zone can be adjusted to easily achieve hot tearing.
What are the requirements for colorants in inks? 
What are the factors affecting ink oxidative conjunctival drying? 
What factors affect the low adhesion fastness of plastic gravure printing ink? 
What are the advantages of printing glass with a uv flatbed printer? 
How to control the viscosity of water-based ink? 
What are the competitive advantages of uv inks? 
Is the viscosity of water-based ink important? 
What factors determine the shelf life of uv inks?
