Five factors that affect the life of the photo machine.
author: Uvink
2022-12-13
Five factors that affect the life of the photo machine.How can you make your
photo machine last longer? What about adding bigger gains? This should be everyone's
concern. The nozzle is the easiest to break, and the nozzle is also one of the means to
extend the life and reduce the cost.
1. The indoor environment, if the general working environment is not good, it will affect
the indoor equipment to enter the dust, the dust enters the main ink tank and then to
the auxiliary ink tank, and then enters the nozzle, which affects the printing effect of
the nozzle and shortens the service life of the nozzle.
2. Operation, the nozzle part on the surface of the nozzle should not be rubbed against
objects, otherwise there will be fine hairs hanging on the surface of the nozzle. Thus affecting
the printing effect. So strictly speaking, it is very important to operate the equipment.
3. Auxiliary accessories Every accessory on the photo machine has a certain purpose,
so don't remove it casually. Like general main ink cartridge, Secondary ink cartridge,
filter and so on.
photo machine last longer? What about adding bigger gains? This should be everyone's
concern. The nozzle is the easiest to break, and the nozzle is also one of the means to
extend the life and reduce the cost.
1. The indoor environment, if the general working environment is not good, it will affect
the indoor equipment to enter the dust, the dust enters the main ink tank and then to
the auxiliary ink tank, and then enters the nozzle, which affects the printing effect of
the nozzle and shortens the service life of the nozzle.
2. Operation, the nozzle part on the surface of the nozzle should not be rubbed against
objects, otherwise there will be fine hairs hanging on the surface of the nozzle. Thus affecting
the printing effect. So strictly speaking, it is very important to operate the equipment.
3. Auxiliary accessories Every accessory on the photo machine has a certain purpose,
so don't remove it casually. Like general main ink cartridge, Secondary ink cartridge,
filter and so on.
4. Ink, the ink must use the ink recommended by the manufacturer, because these inks have
undergone strict and long-term testing, and they have a certain guarantee for
the equipment and the nozzle.
5. For maintenance, the nozzle must be cleaned before shutting down and power off, and
then put the nozzle on the moisturizing sea surface pad, so as to ensure that the condition of
the nozzle is the same as that of the previous few days. After the nozzle is shut down, be sure to
apply cleaning solution on the surface, and then wrap it with plastic wrap. The nozzle should be
tightly attached to the plastic wrap to avoid reducing the volatilization of cleaning solution
and ink. Can prolong the service life of the nozzle.
What are the requirements for colorants in inks? 
What are the factors affecting ink oxidative conjunctival drying? 
What factors affect the low adhesion fastness of plastic gravure printing ink? 
What are the advantages of printing glass with a uv flatbed printer? 
How to control the viscosity of water-based ink? 
What are the competitive advantages of uv inks? 
Is the viscosity of water-based ink important? 
What factors determine the shelf life of uv inks?
